How to Repair HP Printer Error Code OXC4EB827F? [Solution]

Most users of hp printer that has been long time to encounter error OXC4EB827F messages on them printers. Most of them are confused when getting the error OXC4EB827F message. There are some solutin of this error that we are offering to you: 


Simpe Solution 1:

After some research from many of HP printer users, we came across the simple solution of this error, where a lot of people said to kindly tap on the side of the printer. It worked for many of HP printer users. It seems that this solution is much simple than those proposed by HP technical support. In general, this method is not technically appropriate but sometimes gives the right solution. 

Solution 2

Try the following Steps below:

(1) Without turning off the printer, unplug the USB cable from the back of the device if it is plugged in.

[NOTE]: The USB cable is plugged into the port on the back of the device. A USB icon is on this port.

(2) Remove the cartridges from the device.

(3) Wait for the Missed Cartridges message on the control panel.

(4) Unplug the power cord from the back of the device.

(5) Wait 60 seconds.

(6) Reconnect the power cord. If the device does not turn on automatically, press the Power button.

(7) Insert a cartridge, you can start with Black, then close any device door that may be open.

(8) Wait until the message that the cartridges are missing removes the logo from the black cartridge (the pentagram).

(9) Insert the cartridges one by one as explained above.

(10) If you are prompted to print a calibration page, so do it.

Solution 3:

In some cases, removing the ink cartridges and resetting the printer may resolve the error message. The steps are below:

(1) Turn on the printer.

(2) Before you continue, wait until the printer is idle and silent.

(3) Disconnect the USB cable from the back of the printer. If your printer has a network or wireless connection, leave it connected.

(4) Remove the ink cartridges from the printer.

(5) Wait for the Missed Cartridges message to appear on the control panel.

(6) With the printer turned on, unplug the power cord from the back of the printer and from the wall outlet.

(7) Wait at least 60 seconds.

(8) Reconnect the power cord to the wall outlet.

(9) Reconnect the power cord to the back of the printer.

(10) Turn on the printer if it does not do it automatically.

(11) The printer may go through a preheat cycle. It is also possible that the lights on the printer are blinking and the carriage is moving.

(12) Wait until the end of the warm-up cycle and until your printer is idle and silent before proceeding.

(13) Wait until the message that the cartridges are missing removes the logo from the black cartridge (the pentagram).

(14) Reinsert the ink cartridges, and close the cartridge access door.

(15) Print a calibration page, if prompted.

(16) If you have disconnected the USB cable, reconnect it to the back of the product.

(17) Try to print.

[NOTE]: HP recommends that you reconnect the printer power cord directly to a wall outlet.

Solution 4:

Step 1: Take out the ink cartridges. When the printer is on, the user will need to remove the ink cartridges and after that unplug the power button from the back of the HP printer.

Step 2: shut down the computer system. After that simply shut down the system device

Step 3: Power off the wireless router. Now you need to off the wireless router.

Step 4: Completion stage. Complete the process and wait for minimum 60 seconds.

Step 5: plug-in procedure. Plug in the power cable openly to the printer

Step 6: Install the cartridge. Installation of the cartridges as it is a required step that is to be performed must.

Step 7: Create a copy. Craft a clear copy of cartridge which is well recommendable for the users.

Step 8: Turn on your computer system. The next step is that you have to open the computer

Step 9: Power on the router. You are required to ON the wireless router and then you need to use the printer.

Subscribe to receive free email updates:

0 Response to "How to Repair HP Printer Error Code OXC4EB827F? [Solution]"

Posting Komentar